<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Container;
class NodeNetworkConfig extends \Google\Collection
{
protected $collection_key = 'additionalPodNetworkConfigs';
protected $additionalNodeNetworkConfigsType = AdditionalNodeNetworkConfig::class;
protected $additionalNodeNetworkConfigsDataType = 'array';
protected $additionalPodNetworkConfigsType = AdditionalPodNetworkConfig::class;
protected $additionalPodNetworkConfigsDataType = 'array';
/**
* Input only. Whether to create a new range for pod IPs in this node pool.
* Defaults are provided for `pod_range` and `pod_ipv4_cidr_block` if they are
* not specified. If neither `create_pod_range` or `pod_range` are specified,
* the cluster-level default (`ip_allocation_policy.cluster_ipv4_cidr_block`)
* is used. Only applicable if `ip_allocation_policy.use_ip_aliases` is true.
* This field cannot be changed after the node pool has been created.
*
* @var bool
*/
public $createPodRange;
/**
* Whether nodes have internal IP addresses only. If enable_private_nodes is
* not specified, then the value is derived from
* Cluster.NetworkConfig.default_enable_private_nodes
*
* @var bool
*/
public $enablePrivateNodes;
protected $networkPerformanceConfigType = NetworkPerformanceConfig::class;
protected $networkPerformanceConfigDataType = '';
protected $networkTierConfigType = NetworkTierConfig::class;
protected $networkTierConfigDataType = '';
protected $podCidrOverprovisionConfigType = PodCIDROverprovisionConfig::class;
protected $podCidrOverprovisionConfigDataType = '';
/**
* The IP address range for pod IPs in this node pool. Only applicable if
* `create_pod_range` is true. Set to blank to have a range chosen with the
* default size. Set to /netmask (e.g. `/14`) to have a range chosen with a
* specific netmask. Set to a
* [CIDR](https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
* notation (e.g. `10.96.0.0/14`) to pick a specific range to use. Only
* applicable if `ip_allocation_policy.use_ip_aliases` is true. This field
* cannot be changed after the node pool has been created.
*
* @var string
*/
public $podIpv4CidrBlock;
/**
* Output only. The utilization of the IPv4 range for the pod. The ratio is
* Usage/[Total number of IPs in the secondary range],
* Usage=numNodes*numZones*podIPsPerNode.
*
* @var
*/
public $podIpv4RangeUtilization;
/**
* The ID of the secondary range for pod IPs. If `create_pod_range` is true,
* this ID is used for the new range. If `create_pod_range` is false, uses an
* existing secondary range with this ID. Only applicable if
* `ip_allocation_policy.use_ip_aliases` is true. This field cannot be changed
* after the node pool has been created.
*
* @var string
*/
public $podRange;
/**
* The subnetwork path for the node pool. Format:
* projects/{project}/regions/{region}/subnetworks/{subnetwork} If the cluster
* is associated with multiple subnetworks, the subnetwork for the node pool
* is picked based on the IP utilization during node pool creation and is
* immutable.
*
* @var string
*/
public $subnetwork;
/**
* We specify the additional node networks for this node pool using this list.
* Each node network corresponds to an additional interface
*
* @param AdditionalNodeNetworkConfig[] $additionalNodeNetworkConfigs
*/
public function setAdditionalNodeNetworkConfigs($additionalNodeNetworkConfigs)
{
$this->additionalNodeNetworkConfigs = $additionalNodeNetworkConfigs;
}
/**
* @return AdditionalNodeNetworkConfig[]
*/
public function getAdditionalNodeNetworkConfigs()
{
return $this->additionalNodeNetworkConfigs;
}
/**
* We specify the additional pod networks for this node pool using this list.
* Each pod network corresponds to an additional alias IP range for the node
*
* @param AdditionalPodNetworkConfig[] $additionalPodNetworkConfigs
*/
public function setAdditionalPodNetworkConfigs($additionalPodNetworkConfigs)
{
$this->additionalPodNetworkConfigs = $additionalPodNetworkConfigs;
}
/**
* @return AdditionalPodNetworkConfig[]
*/
public function getAdditionalPodNetworkConfigs()
{
return $this->additionalPodNetworkConfigs;
}
/**
* Input only. Whether to create a new range for pod IPs in this node pool.
* Defaults are provided for `pod_range` and `pod_ipv4_cidr_block` if they are
* not specified. If neither `create_pod_range` or `pod_range` are specified,
* the cluster-level default (`ip_allocation_policy.cluster_ipv4_cidr_block`)
* is used. Only applicable if `ip_allocation_policy.use_ip_aliases` is true.
* This field cannot be changed after the node pool has been created.
*
* @param bool $createPodRange
*/
public function setCreatePodRange($createPodRange)
{
$this->createPodRange = $createPodRange;
}
/**
* @return bool
*/
public function getCreatePodRange()
{
return $this->createPodRange;
}
/**
* Whether nodes have internal IP addresses only. If enable_private_nodes is
* not specified, then the value is derived from
* Cluster.NetworkConfig.default_enable_private_nodes
*
* @param bool $enablePrivateNodes
*/
public function setEnablePrivateNodes($enablePrivateNodes)
{
$this->enablePrivateNodes = $enablePrivateNodes;
}
/**
* @return bool
*/
public function getEnablePrivateNodes()
{
return $this->enablePrivateNodes;
}
/**
* Network bandwidth tier configuration.
*
* @param NetworkPerformanceConfig $networkPerformanceConfig
*/
public function setNetworkPerformanceConfig(NetworkPerformanceConfig $networkPerformanceConfig)
{
$this->networkPerformanceConfig = $networkPerformanceConfig;
}
/**
* @return NetworkPerformanceConfig
*/
public function getNetworkPerformanceConfig()
{
return $this->networkPerformanceConfig;
}
/**
* Output only. The network tier configuration for the node pool inherits from
* the cluster-level configuration and remains immutable throughout the node
* pool's lifecycle, including during upgrades.
*
* @param NetworkTierConfig $networkTierConfig
*/
public function setNetworkTierConfig(NetworkTierConfig $networkTierConfig)
{
$this->networkTierConfig = $networkTierConfig;
}
/**
* @return NetworkTierConfig
*/
public function getNetworkTierConfig()
{
return $this->networkTierConfig;
}
/**
* [PRIVATE FIELD] Pod CIDR size overprovisioning config for the nodepool. Pod
* CIDR size per node depends on max_pods_per_node. By default, the value of
* max_pods_per_node is rounded off to next power of 2 and we then double that
* to get the size of pod CIDR block per node. Example: max_pods_per_node of
* 30 would result in 64 IPs (/26). This config can disable the doubling of
* IPs (we still round off to next power of 2) Example: max_pods_per_node of
* 30 will result in 32 IPs (/27) when overprovisioning is disabled.
*
* @param PodCIDROverprovisionConfig $podCidrOverprovisionConfig
*/
public function setPodCidrOverprovisionConfig(PodCIDROverprovisionConfig $podCidrOverprovisionConfig)
{
$this->podCidrOverprovisionConfig = $podCidrOverprovisionConfig;
}
/**
* @return PodCIDROverprovisionConfig
*/
public function getPodCidrOverprovisionConfig()
{
return $this->podCidrOverprovisionConfig;
}
/**
* The IP address range for pod IPs in this node pool. Only applicable if
* `create_pod_range` is true. Set to blank to have a range chosen with the
* default size. Set to /netmask (e.g. `/14`) to have a range chosen with a
* specific netmask. Set to a
* [CIDR](https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
* notation (e.g. `10.96.0.0/14`) to pick a specific range to use. Only
* applicable if `ip_allocation_policy.use_ip_aliases` is true. This field
* cannot be changed after the node pool has been created.
*
* @param string $podIpv4CidrBlock
*/
public function setPodIpv4CidrBlock($podIpv4CidrBlock)
{
$this->podIpv4CidrBlock = $podIpv4CidrBlock;
}
/**
* @return string
*/
public function getPodIpv4CidrBlock()
{
return $this->podIpv4CidrBlock;
}
public function setPodIpv4RangeUtilization($podIpv4RangeUtilization)
{
$this->podIpv4RangeUtilization = $podIpv4RangeUtilization;
}
public function getPodIpv4RangeUtilization()
{
return $this->podIpv4RangeUtilization;
}
/**
* The ID of the secondary range for pod IPs. If `create_pod_range` is true,
* this ID is used for the new range. If `create_pod_range` is false, uses an
* existing secondary range with this ID. Only applicable if
* `ip_allocation_policy.use_ip_aliases` is true. This field cannot be changed
* after the node pool has been created.
*
* @param string $podRange
*/
public function setPodRange($podRange)
{
$this->podRange = $podRange;
}
/**
* @return string
*/
public function getPodRange()
{
return $this->podRange;
}
/**
* The subnetwork path for the node pool. Format:
* projects/{project}/regions/{region}/subnetworks/{subnetwork} If the cluster
* is associated with multiple subnetworks, the subnetwork for the node pool
* is picked based on the IP utilization during node pool creation and is
* immutable.
*
* @param string $subnetwork
*/
public function setSubnetwork($subnetwork)
{
$this->subnetwork = $subnetwork;
}
/**
* @return string
*/
public function getSubnetwork()
{
return $this->subnetwork;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(NodeNetworkConfig::class, 'Google_Service_Container_NodeNetworkConfig');