File "ApnSetting.php"
Full Path: /home/palsarh/web/palsarh.in/public_html/vendor/google/apiclient-services/src/AndroidManagement/ApnSetting.php
File size: 16.07 KB
MIME-type: text/x-php
Charset: utf-8
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\AndroidManagement;
class ApnSetting extends \Google\Collection
{
/**
* Unspecified. Defaults to NOT_ALWAYS_ON.
*/
public const ALWAYS_ON_SETTING_ALWAYS_ON_SETTING_UNSPECIFIED = 'ALWAYS_ON_SETTING_UNSPECIFIED';
/**
* The PDU session brought up by this APN should not be always on.
*/
public const ALWAYS_ON_SETTING_NOT_ALWAYS_ON = 'NOT_ALWAYS_ON';
/**
* The PDU session brought up by this APN should always be on. Supported on
* Android 15 and above. A NonComplianceDetail with API_LEVEL is reported if
* the Android version is less than 15.
*/
public const ALWAYS_ON_SETTING_ALWAYS_ON = 'ALWAYS_ON';
/**
* Unspecified. If username is empty, defaults to NONE. Otherwise, defaults to
* PAP_OR_CHAP.
*/
public const AUTH_TYPE_AUTH_TYPE_UNSPECIFIED = 'AUTH_TYPE_UNSPECIFIED';
/**
* Authentication is not required.
*/
public const AUTH_TYPE_NONE = 'NONE';
/**
* Authentication type for PAP.
*/
public const AUTH_TYPE_PAP = 'PAP';
/**
* Authentication type for CHAP.
*/
public const AUTH_TYPE_CHAP = 'CHAP';
/**
* Authentication type for PAP or CHAP.
*/
public const AUTH_TYPE_PAP_OR_CHAP = 'PAP_OR_CHAP';
/**
* The MVNO type is not specified.
*/
public const MVNO_TYPE_MVNO_TYPE_UNSPECIFIED = 'MVNO_TYPE_UNSPECIFIED';
/**
* MVNO type for group identifier level 1.
*/
public const MVNO_TYPE_GID = 'GID';
/**
* MVNO type for ICCID.
*/
public const MVNO_TYPE_ICCID = 'ICCID';
/**
* MVNO type for IMSI.
*/
public const MVNO_TYPE_IMSI = 'IMSI';
/**
* MVNO type for SPN (service provider name).
*/
public const MVNO_TYPE_SPN = 'SPN';
/**
* The protocol is not specified.
*/
public const PROTOCOL_PROTOCOL_UNSPECIFIED = 'PROTOCOL_UNSPECIFIED';
/**
* Internet protocol.
*/
public const PROTOCOL_IP = 'IP';
/**
* Virtual PDP type introduced to handle dual IP stack UE capability.
*/
public const PROTOCOL_IPV4V6 = 'IPV4V6';
/**
* Internet protocol, version 6.
*/
public const PROTOCOL_IPV6 = 'IPV6';
/**
* Transfer of Non-IP data to external packet data network.
*/
public const PROTOCOL_NON_IP = 'NON_IP';
/**
* Point to point protocol.
*/
public const PROTOCOL_PPP = 'PPP';
/**
* Transfer of Unstructured data to the Data Network via N6.
*/
public const PROTOCOL_UNSTRUCTURED = 'UNSTRUCTURED';
/**
* The protocol is not specified.
*/
public const ROAMING_PROTOCOL_PROTOCOL_UNSPECIFIED = 'PROTOCOL_UNSPECIFIED';
/**
* Internet protocol.
*/
public const ROAMING_PROTOCOL_IP = 'IP';
/**
* Virtual PDP type introduced to handle dual IP stack UE capability.
*/
public const ROAMING_PROTOCOL_IPV4V6 = 'IPV4V6';
/**
* Internet protocol, version 6.
*/
public const ROAMING_PROTOCOL_IPV6 = 'IPV6';
/**
* Transfer of Non-IP data to external packet data network.
*/
public const ROAMING_PROTOCOL_NON_IP = 'NON_IP';
/**
* Point to point protocol.
*/
public const ROAMING_PROTOCOL_PPP = 'PPP';
/**
* Transfer of Unstructured data to the Data Network via N6.
*/
public const ROAMING_PROTOCOL_UNSTRUCTURED = 'UNSTRUCTURED';
protected $collection_key = 'networkTypes';
/**
* Optional. Whether User Plane resources have to be activated during every
* transition from CM-IDLE mode to CM-CONNECTED state for this APN. See 3GPP
* TS 23.501 section 5.6.13.
*
* @var string
*/
public $alwaysOnSetting;
/**
* Required. Name of the APN. Policy will be rejected if this field is empty.
*
* @var string
*/
public $apn;
/**
* Required. Usage categories for the APN. Policy will be rejected if this
* field is empty or contains APN_TYPE_UNSPECIFIED or duplicates. Multiple APN
* types can be set on fully managed devices. ENTERPRISE is the only allowed
* APN type on work profiles. A NonComplianceDetail with MANAGEMENT_MODE is
* reported for any other value on work profiles. APN types that are not
* supported on the device or management mode will be ignored. If this results
* in the empty list, the APN setting will be ignored, because apnTypes is a
* required field. A NonComplianceDetail with INVALID_VALUE is reported if
* none of the APN types are supported on the device or management mode.
*
* @var string[]
*/
public $apnTypes;
/**
* Optional. Authentication type of the APN.
*
* @var string
*/
public $authType;
/**
* Optional. Carrier ID for the APN. A value of 0 (default) means not set and
* negative values are rejected.
*
* @var int
*/
public $carrierId;
/**
* Required. Human-readable name that describes the APN. Policy will be
* rejected if this field is empty.
*
* @var string
*/
public $displayName;
/**
* Optional. MMS (Multimedia Messaging Service) proxy address of the APN which
* can be an IP address or hostname (not a URL).
*
* @var string
*/
public $mmsProxyAddress;
/**
* Optional. MMS (Multimedia Messaging Service) proxy port of the APN. A value
* of 0 (default) means not set and negative values are rejected.
*
* @var int
*/
public $mmsProxyPort;
/**
* Optional. MMSC (Multimedia Messaging Service Center) URI of the APN.
*
* @var string
*/
public $mmsc;
/**
* Optional. The default MTU (Maximum Transmission Unit) size in bytes of the
* IPv4 routes brought up by this APN setting. A value of 0 (default) means
* not set and negative values are rejected. Supported on Android 13 and
* above. A NonComplianceDetail with API_LEVEL is reported if the Android
* version is less than 13.
*
* @var int
*/
public $mtuV4;
/**
* Optional. The MTU (Maximum Transmission Unit) size of the IPv6 mobile
* interface to which the APN connected. A value of 0 (default) means not set
* and negative values are rejected. Supported on Android 13 and above. A
* NonComplianceDetail with API_LEVEL is reported if the Android version is
* less than 13.
*
* @var int
*/
public $mtuV6;
/**
* Optional. MVNO match type for the APN.
*
* @var string
*/
public $mvnoType;
/**
* Optional. Radio technologies (network types) the APN may use. Policy will
* be rejected if this field contains NETWORK_TYPE_UNSPECIFIED or duplicates.
*
* @var string[]
*/
public $networkTypes;
/**
* Optional. The numeric operator ID of the APN. Numeric operator ID is
* defined as MCC (Mobile Country Code) + MNC (Mobile Network Code).
*
* @var string
*/
public $numericOperatorId;
/**
* Optional. APN password of the APN.
*
* @var string
*/
public $password;
/**
* Optional. The protocol to use to connect to this APN.
*
* @var string
*/
public $protocol;
/**
* Optional. The proxy address of the APN.
*
* @var string
*/
public $proxyAddress;
/**
* Optional. The proxy port of the APN. A value of 0 (default) means not set
* and negative values are rejected.
*
* @var int
*/
public $proxyPort;
/**
* Optional. The protocol to use to connect to this APN while the device is
* roaming.
*
* @var string
*/
public $roamingProtocol;
/**
* Optional. APN username of the APN.
*
* @var string
*/
public $username;
/**
* Optional. Whether User Plane resources have to be activated during every
* transition from CM-IDLE mode to CM-CONNECTED state for this APN. See 3GPP
* TS 23.501 section 5.6.13.
*
* Accepted values: ALWAYS_ON_SETTING_UNSPECIFIED, NOT_ALWAYS_ON, ALWAYS_ON
*
* @param self::ALWAYS_ON_SETTING_* $alwaysOnSetting
*/
public function setAlwaysOnSetting($alwaysOnSetting)
{
$this->alwaysOnSetting = $alwaysOnSetting;
}
/**
* @return self::ALWAYS_ON_SETTING_*
*/
public function getAlwaysOnSetting()
{
return $this->alwaysOnSetting;
}
/**
* Required. Name of the APN. Policy will be rejected if this field is empty.
*
* @param string $apn
*/
public function setApn($apn)
{
$this->apn = $apn;
}
/**
* @return string
*/
public function getApn()
{
return $this->apn;
}
/**
* Required. Usage categories for the APN. Policy will be rejected if this
* field is empty or contains APN_TYPE_UNSPECIFIED or duplicates. Multiple APN
* types can be set on fully managed devices. ENTERPRISE is the only allowed
* APN type on work profiles. A NonComplianceDetail with MANAGEMENT_MODE is
* reported for any other value on work profiles. APN types that are not
* supported on the device or management mode will be ignored. If this results
* in the empty list, the APN setting will be ignored, because apnTypes is a
* required field. A NonComplianceDetail with INVALID_VALUE is reported if
* none of the APN types are supported on the device or management mode.
*
* @param string[] $apnTypes
*/
public function setApnTypes($apnTypes)
{
$this->apnTypes = $apnTypes;
}
/**
* @return string[]
*/
public function getApnTypes()
{
return $this->apnTypes;
}
/**
* Optional. Authentication type of the APN.
*
* Accepted values: AUTH_TYPE_UNSPECIFIED, NONE, PAP, CHAP, PAP_OR_CHAP
*
* @param self::AUTH_TYPE_* $authType
*/
public function setAuthType($authType)
{
$this->authType = $authType;
}
/**
* @return self::AUTH_TYPE_*
*/
public function getAuthType()
{
return $this->authType;
}
/**
* Optional. Carrier ID for the APN. A value of 0 (default) means not set and
* negative values are rejected.
*
* @param int $carrierId
*/
public function setCarrierId($carrierId)
{
$this->carrierId = $carrierId;
}
/**
* @return int
*/
public function getCarrierId()
{
return $this->carrierId;
}
/**
* Required. Human-readable name that describes the APN. Policy will be
* rejected if this field is empty.
*
* @param string $displayName
*/
public function setDisplayName($displayName)
{
$this->displayName = $displayName;
}
/**
* @return string
*/
public function getDisplayName()
{
return $this->displayName;
}
/**
* Optional. MMS (Multimedia Messaging Service) proxy address of the APN which
* can be an IP address or hostname (not a URL).
*
* @param string $mmsProxyAddress
*/
public function setMmsProxyAddress($mmsProxyAddress)
{
$this->mmsProxyAddress = $mmsProxyAddress;
}
/**
* @return string
*/
public function getMmsProxyAddress()
{
return $this->mmsProxyAddress;
}
/**
* Optional. MMS (Multimedia Messaging Service) proxy port of the APN. A value
* of 0 (default) means not set and negative values are rejected.
*
* @param int $mmsProxyPort
*/
public function setMmsProxyPort($mmsProxyPort)
{
$this->mmsProxyPort = $mmsProxyPort;
}
/**
* @return int
*/
public function getMmsProxyPort()
{
return $this->mmsProxyPort;
}
/**
* Optional. MMSC (Multimedia Messaging Service Center) URI of the APN.
*
* @param string $mmsc
*/
public function setMmsc($mmsc)
{
$this->mmsc = $mmsc;
}
/**
* @return string
*/
public function getMmsc()
{
return $this->mmsc;
}
/**
* Optional. The default MTU (Maximum Transmission Unit) size in bytes of the
* IPv4 routes brought up by this APN setting. A value of 0 (default) means
* not set and negative values are rejected. Supported on Android 13 and
* above. A NonComplianceDetail with API_LEVEL is reported if the Android
* version is less than 13.
*
* @param int $mtuV4
*/
public function setMtuV4($mtuV4)
{
$this->mtuV4 = $mtuV4;
}
/**
* @return int
*/
public function getMtuV4()
{
return $this->mtuV4;
}
/**
* Optional. The MTU (Maximum Transmission Unit) size of the IPv6 mobile
* interface to which the APN connected. A value of 0 (default) means not set
* and negative values are rejected. Supported on Android 13 and above. A
* NonComplianceDetail with API_LEVEL is reported if the Android version is
* less than 13.
*
* @param int $mtuV6
*/
public function setMtuV6($mtuV6)
{
$this->mtuV6 = $mtuV6;
}
/**
* @return int
*/
public function getMtuV6()
{
return $this->mtuV6;
}
/**
* Optional. MVNO match type for the APN.
*
* Accepted values: MVNO_TYPE_UNSPECIFIED, GID, ICCID, IMSI, SPN
*
* @param self::MVNO_TYPE_* $mvnoType
*/
public function setMvnoType($mvnoType)
{
$this->mvnoType = $mvnoType;
}
/**
* @return self::MVNO_TYPE_*
*/
public function getMvnoType()
{
return $this->mvnoType;
}
/**
* Optional. Radio technologies (network types) the APN may use. Policy will
* be rejected if this field contains NETWORK_TYPE_UNSPECIFIED or duplicates.
*
* @param string[] $networkTypes
*/
public function setNetworkTypes($networkTypes)
{
$this->networkTypes = $networkTypes;
}
/**
* @return string[]
*/
public function getNetworkTypes()
{
return $this->networkTypes;
}
/**
* Optional. The numeric operator ID of the APN. Numeric operator ID is
* defined as MCC (Mobile Country Code) + MNC (Mobile Network Code).
*
* @param string $numericOperatorId
*/
public function setNumericOperatorId($numericOperatorId)
{
$this->numericOperatorId = $numericOperatorId;
}
/**
* @return string
*/
public function getNumericOperatorId()
{
return $this->numericOperatorId;
}
/**
* Optional. APN password of the APN.
*
* @param string $password
*/
public function setPassword($password)
{
$this->password = $password;
}
/**
* @return string
*/
public function getPassword()
{
return $this->password;
}
/**
* Optional. The protocol to use to connect to this APN.
*
* Accepted values: PROTOCOL_UNSPECIFIED, IP, IPV4V6, IPV6, NON_IP, PPP,
* UNSTRUCTURED
*
* @param self::PROTOCOL_* $protocol
*/
public function setProtocol($protocol)
{
$this->protocol = $protocol;
}
/**
* @return self::PROTOCOL_*
*/
public function getProtocol()
{
return $this->protocol;
}
/**
* Optional. The proxy address of the APN.
*
* @param string $proxyAddress
*/
public function setProxyAddress($proxyAddress)
{
$this->proxyAddress = $proxyAddress;
}
/**
* @return string
*/
public function getProxyAddress()
{
return $this->proxyAddress;
}
/**
* Optional. The proxy port of the APN. A value of 0 (default) means not set
* and negative values are rejected.
*
* @param int $proxyPort
*/
public function setProxyPort($proxyPort)
{
$this->proxyPort = $proxyPort;
}
/**
* @return int
*/
public function getProxyPort()
{
return $this->proxyPort;
}
/**
* Optional. The protocol to use to connect to this APN while the device is
* roaming.
*
* Accepted values: PROTOCOL_UNSPECIFIED, IP, IPV4V6, IPV6, NON_IP, PPP,
* UNSTRUCTURED
*
* @param self::ROAMING_PROTOCOL_* $roamingProtocol
*/
public function setRoamingProtocol($roamingProtocol)
{
$this->roamingProtocol = $roamingProtocol;
}
/**
* @return self::ROAMING_PROTOCOL_*
*/
public function getRoamingProtocol()
{
return $this->roamingProtocol;
}
/**
* Optional. APN username of the APN.
*
* @param string $username
*/
public function setUsername($username)
{
$this->username = $username;
}
/**
* @return string
*/
public function getUsername()
{
return $this->username;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(ApnSetting::class, 'Google_Service_AndroidManagement_ApnSetting');