File "VolumeBackup.php"
Full Path: /home/palsarh/web/palsarh.in/public_html/vendor/google/apiclient-services/src/BackupforGKE/VolumeBackup.php
File size: 10.85 KB
MIME-type: text/x-php
Charset: utf-8
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\BackupforGKE;
class VolumeBackup extends \Google\Model
{
/**
* Default value, not specified.
*/
public const FORMAT_VOLUME_BACKUP_FORMAT_UNSPECIFIED = 'VOLUME_BACKUP_FORMAT_UNSPECIFIED';
/**
* Compute Engine Persistent Disk snapshot based volume backup.
*/
public const FORMAT_GCE_PERSISTENT_DISK = 'GCE_PERSISTENT_DISK';
/**
* This is an illegal state and should not be encountered.
*/
public const STATE_STATE_UNSPECIFIED = 'STATE_UNSPECIFIED';
/**
* A volume for the backup was identified and backup process is about to
* start.
*/
public const STATE_CREATING = 'CREATING';
/**
* The volume backup operation has begun and is in the initial "snapshot"
* phase of the process. Any defined ProtectedApplication "pre" hooks will be
* executed before entering this state and "post" hooks will be executed upon
* leaving this state.
*/
public const STATE_SNAPSHOTTING = 'SNAPSHOTTING';
/**
* The snapshot phase of the volume backup operation has completed and the
* snapshot is now being uploaded to backup storage.
*/
public const STATE_UPLOADING = 'UPLOADING';
/**
* The volume backup operation has completed successfully.
*/
public const STATE_SUCCEEDED = 'SUCCEEDED';
/**
* The volume backup operation has failed.
*/
public const STATE_FAILED = 'FAILED';
/**
* This VolumeBackup resource (and its associated artifacts) is in the process
* of being deleted.
*/
public const STATE_DELETING = 'DELETING';
/**
* The underlying artifacts of a volume backup (eg: persistent disk snapshots)
* are deleted.
*/
public const STATE_CLEANED_UP = 'CLEANED_UP';
/**
* Output only. The timestamp when the associated underlying volume backup
* operation completed.
*
* @var string
*/
public $completeTime;
/**
* Output only. The timestamp when this VolumeBackup resource was created.
*
* @var string
*/
public $createTime;
/**
* Output only. The minimum size of the disk to which this VolumeBackup can be
* restored.
*
* @var string
*/
public $diskSizeBytes;
/**
* Output only. `etag` is used for optimistic concurrency control as a way to
* help prevent simultaneous updates of a volume backup from overwriting each
* other. It is strongly suggested that systems make use of the `etag` in the
* read-modify-write cycle to perform volume backup updates in order to avoid
* race conditions.
*
* @var string
*/
public $etag;
/**
* Output only. The format used for the volume backup.
*
* @var string
*/
public $format;
/**
* Output only. The full name of the VolumeBackup resource. Format:
* `projects/locations/backupPlans/backups/volumeBackups`.
*
* @var string
*/
public $name;
/**
* Output only. [Output Only] Reserved for future use.
*
* @var bool
*/
public $satisfiesPzi;
/**
* Output only. [Output Only] Reserved for future use.
*
* @var bool
*/
public $satisfiesPzs;
protected $sourcePvcType = NamespacedName::class;
protected $sourcePvcDataType = '';
/**
* Output only. The current state of this VolumeBackup.
*
* @var string
*/
public $state;
/**
* Output only. A human readable message explaining why the VolumeBackup is in
* its current state. This field is only meant for human consumption and
* should not be used programmatically as this field is not guaranteed to be
* consistent.
*
* @var string
*/
public $stateMessage;
/**
* Output only. The aggregate size of the underlying artifacts associated with
* this VolumeBackup in the backup storage. This may change over time when
* multiple backups of the same volume share the same backup storage location.
* In particular, this is likely to increase in size when the immediately
* preceding backup of the same volume is deleted.
*
* @var string
*/
public $storageBytes;
/**
* Output only. Server generated global unique identifier of
* [UUID](https://en.wikipedia.org/wiki/Universally_unique_identifier) format.
*
* @var string
*/
public $uid;
/**
* Output only. The timestamp when this VolumeBackup resource was last
* updated.
*
* @var string
*/
public $updateTime;
/**
* Output only. A storage system-specific opaque handle to the underlying
* volume backup.
*
* @var string
*/
public $volumeBackupHandle;
/**
* Output only. The timestamp when the associated underlying volume backup
* operation completed.
*
* @param string $completeTime
*/
public function setCompleteTime($completeTime)
{
$this->completeTime = $completeTime;
}
/**
* @return string
*/
public function getCompleteTime()
{
return $this->completeTime;
}
/**
* Output only. The timestamp when this VolumeBackup resource was created.
*
* @param string $createTime
*/
public function setCreateTime($createTime)
{
$this->createTime = $createTime;
}
/**
* @return string
*/
public function getCreateTime()
{
return $this->createTime;
}
/**
* Output only. The minimum size of the disk to which this VolumeBackup can be
* restored.
*
* @param string $diskSizeBytes
*/
public function setDiskSizeBytes($diskSizeBytes)
{
$this->diskSizeBytes = $diskSizeBytes;
}
/**
* @return string
*/
public function getDiskSizeBytes()
{
return $this->diskSizeBytes;
}
/**
* Output only. `etag` is used for optimistic concurrency control as a way to
* help prevent simultaneous updates of a volume backup from overwriting each
* other. It is strongly suggested that systems make use of the `etag` in the
* read-modify-write cycle to perform volume backup updates in order to avoid
* race conditions.
*
* @param string $etag
*/
public function setEtag($etag)
{
$this->etag = $etag;
}
/**
* @return string
*/
public function getEtag()
{
return $this->etag;
}
/**
* Output only. The format used for the volume backup.
*
* Accepted values: VOLUME_BACKUP_FORMAT_UNSPECIFIED, GCE_PERSISTENT_DISK
*
* @param self::FORMAT_* $format
*/
public function setFormat($format)
{
$this->format = $format;
}
/**
* @return self::FORMAT_*
*/
public function getFormat()
{
return $this->format;
}
/**
* Output only. The full name of the VolumeBackup resource. Format:
* `projects/locations/backupPlans/backups/volumeBackups`.
*
* @param string $name
*/
public function setName($name)
{
$this->name = $name;
}
/**
* @return string
*/
public function getName()
{
return $this->name;
}
/**
* Output only. [Output Only] Reserved for future use.
*
* @param bool $satisfiesPzi
*/
public function setSatisfiesPzi($satisfiesPzi)
{
$this->satisfiesPzi = $satisfiesPzi;
}
/**
* @return bool
*/
public function getSatisfiesPzi()
{
return $this->satisfiesPzi;
}
/**
* Output only. [Output Only] Reserved for future use.
*
* @param bool $satisfiesPzs
*/
public function setSatisfiesPzs($satisfiesPzs)
{
$this->satisfiesPzs = $satisfiesPzs;
}
/**
* @return bool
*/
public function getSatisfiesPzs()
{
return $this->satisfiesPzs;
}
/**
* Output only. A reference to the source Kubernetes PVC from which this
* VolumeBackup was created.
*
* @param NamespacedName $sourcePvc
*/
public function setSourcePvc(NamespacedName $sourcePvc)
{
$this->sourcePvc = $sourcePvc;
}
/**
* @return NamespacedName
*/
public function getSourcePvc()
{
return $this->sourcePvc;
}
/**
* Output only. The current state of this VolumeBackup.
*
* Accepted values: STATE_UNSPECIFIED, CREATING, SNAPSHOTTING, UPLOADING,
* SUCCEEDED, FAILED, DELETING, CLEANED_UP
*
* @param self::STATE_* $state
*/
public function setState($state)
{
$this->state = $state;
}
/**
* @return self::STATE_*
*/
public function getState()
{
return $this->state;
}
/**
* Output only. A human readable message explaining why the VolumeBackup is in
* its current state. This field is only meant for human consumption and
* should not be used programmatically as this field is not guaranteed to be
* consistent.
*
* @param string $stateMessage
*/
public function setStateMessage($stateMessage)
{
$this->stateMessage = $stateMessage;
}
/**
* @return string
*/
public function getStateMessage()
{
return $this->stateMessage;
}
/**
* Output only. The aggregate size of the underlying artifacts associated with
* this VolumeBackup in the backup storage. This may change over time when
* multiple backups of the same volume share the same backup storage location.
* In particular, this is likely to increase in size when the immediately
* preceding backup of the same volume is deleted.
*
* @param string $storageBytes
*/
public function setStorageBytes($storageBytes)
{
$this->storageBytes = $storageBytes;
}
/**
* @return string
*/
public function getStorageBytes()
{
return $this->storageBytes;
}
/**
* Output only. Server generated global unique identifier of
* [UUID](https://en.wikipedia.org/wiki/Universally_unique_identifier) format.
*
* @param string $uid
*/
public function setUid($uid)
{
$this->uid = $uid;
}
/**
* @return string
*/
public function getUid()
{
return $this->uid;
}
/**
* Output only. The timestamp when this VolumeBackup resource was last
* updated.
*
* @param string $updateTime
*/
public function setUpdateTime($updateTime)
{
$this->updateTime = $updateTime;
}
/**
* @return string
*/
public function getUpdateTime()
{
return $this->updateTime;
}
/**
* Output only. A storage system-specific opaque handle to the underlying
* volume backup.
*
* @param string $volumeBackupHandle
*/
public function setVolumeBackupHandle($volumeBackupHandle)
{
$this->volumeBackupHandle = $volumeBackupHandle;
}
/**
* @return string
*/
public function getVolumeBackupHandle()
{
return $this->volumeBackupHandle;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(VolumeBackup::class, 'Google_Service_BackupforGKE_VolumeBackup');