File "GroupAssetsRequest.php"
Full Path: /home/palsarh/web/palsarh.in/public_html/vendor/google/apiclient-services/src/SecurityCommandCenter/GroupAssetsRequest.php
File size: 12.51 KB
MIME-type: text/x-php
Charset: utf-8
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\SecurityCommandCenter;
class GroupAssetsRequest extends \Google\Model
{
/**
* When compare_duration is set, the GroupResult's "state_change" property is
* updated to indicate whether the asset was added, removed, or remained
* present during the compare_duration period of time that precedes the
* read_time. This is the time between (read_time - compare_duration) and
* read_time. The state change value is derived based on the presence of the
* asset at the two points in time. Intermediate state changes between the two
* times don't affect the result. For example, the results aren't affected if
* the asset is removed and re-created again. Possible "state_change" values
* when compare_duration is specified: * "ADDED": indicates that the asset was
* not present at the start of compare_duration, but present at
* reference_time. * "REMOVED": indicates that the asset was present at the
* start of compare_duration, but not present at reference_time. * "ACTIVE":
* indicates that the asset was present at both the start and the end of the
* time period defined by compare_duration and reference_time. If
* compare_duration is not specified, then the only possible state_change is
* "UNUSED", which will be the state_change set for all assets present at
* read_time. If this field is set then `state_change` must be a specified
* field in `group_by`.
*
* @var string
*/
public $compareDuration;
/**
* Expression that defines the filter to apply across assets. The expression
* is a list of zero or more restrictions combined via logical operators `AND`
* and `OR`. Parentheses are supported, and `OR` has higher precedence than
* `AND`. Restrictions have the form ` ` and may have a `-` character in front
* of them to indicate negation. The fields map to those defined in the Asset
* resource. Examples include: * name *
* security_center_properties.resource_name * resource_properties.a_property *
* security_marks.marks.marka The supported operators are: * `=` for all value
* types. * `>`, `<`, `>=`, `<=` for integer values. * `:`, meaning substring
* matching, for strings. The supported value types are: * string literals in
* quotes. * integer literals without quotes. * boolean literals `true` and
* `false` without quotes. The following field and operator combinations are
* supported: * name: `=` * update_time: `=`, `>`, `<`, `>=`, `<=` Usage: This
* should be milliseconds since epoch or an RFC3339 string. Examples:
* `update_time = "2019-06-10T16:07:18-07:00"` `update_time = 1560208038000` *
* create_time: `=`, `>`, `<`, `>=`, `<=` Usage: This should be milliseconds
* since epoch or an RFC3339 string. Examples: `create_time =
* "2019-06-10T16:07:18-07:00"` `create_time = 1560208038000` *
* iam_policy.policy_blob: `=`, `:` * resource_properties: `=`, `:`, `>`, `<`,
* `>=`, `<=` * security_marks.marks: `=`, `:` *
* security_center_properties.resource_name: `=`, `:` *
* security_center_properties.resource_display_name: `=`, `:` *
* security_center_properties.resource_type: `=`, `:` *
* security_center_properties.resource_parent: `=`, `:` *
* security_center_properties.resource_parent_display_name: `=`, `:` *
* security_center_properties.resource_project: `=`, `:` *
* security_center_properties.resource_project_display_name: `=`, `:` *
* security_center_properties.resource_owners: `=`, `:` For example,
* `resource_properties.size = 100` is a valid filter string. Use a partial
* match on the empty string to filter based on a property existing:
* `resource_properties.my_property : ""` Use a negated partial match on the
* empty string to filter based on a property not existing:
* `-resource_properties.my_property : ""`
*
* @var string
*/
public $filter;
/**
* Required. Expression that defines what assets fields to use for grouping.
* The string value should follow SQL syntax: comma separated list of fields.
* For example: "security_center_properties.resource_project,security_center_p
* roperties.project". The following fields are supported when
* compare_duration is not set: * security_center_properties.resource_project
* * security_center_properties.resource_project_display_name *
* security_center_properties.resource_type *
* security_center_properties.resource_parent *
* security_center_properties.resource_parent_display_name The following
* fields are supported when compare_duration is set: *
* security_center_properties.resource_type *
* security_center_properties.resource_project_display_name *
* security_center_properties.resource_parent_display_name
*
* @var string
*/
public $groupBy;
/**
* The maximum number of results to return in a single response. Default is
* 10, minimum is 1, maximum is 1000.
*
* @var int
*/
public $pageSize;
/**
* The value returned by the last `GroupAssetsResponse`; indicates that this
* is a continuation of a prior `GroupAssets` call, and that the system should
* return the next page of data.
*
* @var string
*/
public $pageToken;
/**
* Time used as a reference point when filtering assets. The filter is limited
* to assets existing at the supplied time and their values are those at that
* specific time. Absence of this field will default to the API's version of
* NOW.
*
* @var string
*/
public $readTime;
/**
* When compare_duration is set, the GroupResult's "state_change" property is
* updated to indicate whether the asset was added, removed, or remained
* present during the compare_duration period of time that precedes the
* read_time. This is the time between (read_time - compare_duration) and
* read_time. The state change value is derived based on the presence of the
* asset at the two points in time. Intermediate state changes between the two
* times don't affect the result. For example, the results aren't affected if
* the asset is removed and re-created again. Possible "state_change" values
* when compare_duration is specified: * "ADDED": indicates that the asset was
* not present at the start of compare_duration, but present at
* reference_time. * "REMOVED": indicates that the asset was present at the
* start of compare_duration, but not present at reference_time. * "ACTIVE":
* indicates that the asset was present at both the start and the end of the
* time period defined by compare_duration and reference_time. If
* compare_duration is not specified, then the only possible state_change is
* "UNUSED", which will be the state_change set for all assets present at
* read_time. If this field is set then `state_change` must be a specified
* field in `group_by`.
*
* @param string $compareDuration
*/
public function setCompareDuration($compareDuration)
{
$this->compareDuration = $compareDuration;
}
/**
* @return string
*/
public function getCompareDuration()
{
return $this->compareDuration;
}
/**
* Expression that defines the filter to apply across assets. The expression
* is a list of zero or more restrictions combined via logical operators `AND`
* and `OR`. Parentheses are supported, and `OR` has higher precedence than
* `AND`. Restrictions have the form ` ` and may have a `-` character in front
* of them to indicate negation. The fields map to those defined in the Asset
* resource. Examples include: * name *
* security_center_properties.resource_name * resource_properties.a_property *
* security_marks.marks.marka The supported operators are: * `=` for all value
* types. * `>`, `<`, `>=`, `<=` for integer values. * `:`, meaning substring
* matching, for strings. The supported value types are: * string literals in
* quotes. * integer literals without quotes. * boolean literals `true` and
* `false` without quotes. The following field and operator combinations are
* supported: * name: `=` * update_time: `=`, `>`, `<`, `>=`, `<=` Usage: This
* should be milliseconds since epoch or an RFC3339 string. Examples:
* `update_time = "2019-06-10T16:07:18-07:00"` `update_time = 1560208038000` *
* create_time: `=`, `>`, `<`, `>=`, `<=` Usage: This should be milliseconds
* since epoch or an RFC3339 string. Examples: `create_time =
* "2019-06-10T16:07:18-07:00"` `create_time = 1560208038000` *
* iam_policy.policy_blob: `=`, `:` * resource_properties: `=`, `:`, `>`, `<`,
* `>=`, `<=` * security_marks.marks: `=`, `:` *
* security_center_properties.resource_name: `=`, `:` *
* security_center_properties.resource_display_name: `=`, `:` *
* security_center_properties.resource_type: `=`, `:` *
* security_center_properties.resource_parent: `=`, `:` *
* security_center_properties.resource_parent_display_name: `=`, `:` *
* security_center_properties.resource_project: `=`, `:` *
* security_center_properties.resource_project_display_name: `=`, `:` *
* security_center_properties.resource_owners: `=`, `:` For example,
* `resource_properties.size = 100` is a valid filter string. Use a partial
* match on the empty string to filter based on a property existing:
* `resource_properties.my_property : ""` Use a negated partial match on the
* empty string to filter based on a property not existing:
* `-resource_properties.my_property : ""`
*
* @param string $filter
*/
public function setFilter($filter)
{
$this->filter = $filter;
}
/**
* @return string
*/
public function getFilter()
{
return $this->filter;
}
/**
* Required. Expression that defines what assets fields to use for grouping.
* The string value should follow SQL syntax: comma separated list of fields.
* For example: "security_center_properties.resource_project,security_center_p
* roperties.project". The following fields are supported when
* compare_duration is not set: * security_center_properties.resource_project
* * security_center_properties.resource_project_display_name *
* security_center_properties.resource_type *
* security_center_properties.resource_parent *
* security_center_properties.resource_parent_display_name The following
* fields are supported when compare_duration is set: *
* security_center_properties.resource_type *
* security_center_properties.resource_project_display_name *
* security_center_properties.resource_parent_display_name
*
* @param string $groupBy
*/
public function setGroupBy($groupBy)
{
$this->groupBy = $groupBy;
}
/**
* @return string
*/
public function getGroupBy()
{
return $this->groupBy;
}
/**
* The maximum number of results to return in a single response. Default is
* 10, minimum is 1, maximum is 1000.
*
* @param int $pageSize
*/
public function setPageSize($pageSize)
{
$this->pageSize = $pageSize;
}
/**
* @return int
*/
public function getPageSize()
{
return $this->pageSize;
}
/**
* The value returned by the last `GroupAssetsResponse`; indicates that this
* is a continuation of a prior `GroupAssets` call, and that the system should
* return the next page of data.
*
* @param string $pageToken
*/
public function setPageToken($pageToken)
{
$this->pageToken = $pageToken;
}
/**
* @return string
*/
public function getPageToken()
{
return $this->pageToken;
}
/**
* Time used as a reference point when filtering assets. The filter is limited
* to assets existing at the supplied time and their values are those at that
* specific time. Absence of this field will default to the API's version of
* NOW.
*
* @param string $readTime
*/
public function setReadTime($readTime)
{
$this->readTime = $readTime;
}
/**
* @return string
*/
public function getReadTime()
{
return $this->readTime;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(GroupAssetsRequest::class, 'Google_Service_SecurityCommandCenter_GroupAssetsRequest');