File "Job.php"
Full Path: /home/palsarh/web/palsarh.in/public_html/vendor/google/apiclient-services/src/Transcoder/Job.php
File size: 11.62 KB
MIME-type: text/x-php
Charset: utf-8
<?php
/*
* Copyright 2014 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
namespace Google\Service\Transcoder;
class Job extends \Google\Model
{
/**
* The job processing mode is not specified.
*/
public const MODE_PROCESSING_MODE_UNSPECIFIED = 'PROCESSING_MODE_UNSPECIFIED';
/**
* The job processing mode is interactive mode. Interactive job will either be
* ran or rejected if quota does not allow for it.
*/
public const MODE_PROCESSING_MODE_INTERACTIVE = 'PROCESSING_MODE_INTERACTIVE';
/**
* The job processing mode is batch mode. Batch mode allows queuing of jobs.
*/
public const MODE_PROCESSING_MODE_BATCH = 'PROCESSING_MODE_BATCH';
/**
* The optimization strategy is not specified.
*/
public const OPTIMIZATION_OPTIMIZATION_STRATEGY_UNSPECIFIED = 'OPTIMIZATION_STRATEGY_UNSPECIFIED';
/**
* Prioritize job processing speed.
*/
public const OPTIMIZATION_AUTODETECT = 'AUTODETECT';
/**
* Disable all optimizations.
*/
public const OPTIMIZATION_DISABLED = 'DISABLED';
/**
* The processing state is not specified.
*/
public const STATE_PROCESSING_STATE_UNSPECIFIED = 'PROCESSING_STATE_UNSPECIFIED';
/**
* The job is enqueued and will be picked up for processing soon.
*/
public const STATE_PENDING = 'PENDING';
/**
* The job is being processed.
*/
public const STATE_RUNNING = 'RUNNING';
/**
* The job has been completed successfully.
*/
public const STATE_SUCCEEDED = 'SUCCEEDED';
/**
* The job has failed. For additional information, see [Troubleshooting](https
* ://cloud.google.com/transcoder/docs/troubleshooting).
*/
public const STATE_FAILED = 'FAILED';
/**
* The processing priority of a batch job. This field can only be set for
* batch mode jobs. The default value is 0. This value cannot be negative.
* Higher values correspond to higher priorities for the job.
*
* @var int
*/
public $batchModePriority;
protected $configType = JobConfig::class;
protected $configDataType = '';
/**
* Output only. The time the job was created.
*
* @var string
*/
public $createTime;
/**
* Output only. The time the transcoding finished.
*
* @var string
*/
public $endTime;
protected $errorType = Status::class;
protected $errorDataType = '';
/**
* Optional. Insert silence and duplicate frames when timestamp gaps are
* detected in a given stream.
*
* @var bool
*/
public $fillContentGaps;
/**
* Input only. Specify the `input_uri` to populate empty `uri` fields in each
* element of `Job.config.inputs` or `JobTemplate.config.inputs` when using
* template. URI of the media. Input files must be at least 5 seconds in
* duration and stored in Cloud Storage (for example,
* `gs://bucket/inputs/file.mp4`). See [Supported input and output
* formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-
* and-output-formats).
*
* @var string
*/
public $inputUri;
/**
* The labels associated with this job. You can use these to organize and
* group your jobs.
*
* @var string[]
*/
public $labels;
/**
* The processing mode of the job. The default is
* `PROCESSING_MODE_INTERACTIVE`.
*
* @var string
*/
public $mode;
/**
* The resource name of the job. Format:
* `projects/{project_number}/locations/{location}/jobs/{job}`
*
* @var string
*/
public $name;
/**
* Optional. The optimization strategy of the job. The default is
* `AUTODETECT`.
*
* @var string
*/
public $optimization;
/**
* Input only. Specify the `output_uri` to populate an empty
* `Job.config.output.uri` or `JobTemplate.config.output.uri` when using
* template. URI for the output file(s). For example, `gs://my-
* bucket/outputs/`. See [Supported input and output
* formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-
* and-output-formats).
*
* @var string
*/
public $outputUri;
/**
* Output only. The time the transcoding started.
*
* @var string
*/
public $startTime;
/**
* Output only. The current state of the job.
*
* @var string
*/
public $state;
/**
* Input only. Specify the `template_id` to use for populating `Job.config`.
* The default is `preset/web-hd`, which is the only supported preset. User
* defined JobTemplate: `{job_template_id}`
*
* @var string
*/
public $templateId;
/**
* Job time to live value in days, which will be effective after job
* completion. Job should be deleted automatically after the given TTL. Enter
* a value between 1 and 90. The default is 30.
*
* @var int
*/
public $ttlAfterCompletionDays;
/**
* The processing priority of a batch job. This field can only be set for
* batch mode jobs. The default value is 0. This value cannot be negative.
* Higher values correspond to higher priorities for the job.
*
* @param int $batchModePriority
*/
public function setBatchModePriority($batchModePriority)
{
$this->batchModePriority = $batchModePriority;
}
/**
* @return int
*/
public function getBatchModePriority()
{
return $this->batchModePriority;
}
/**
* The configuration for this job.
*
* @param JobConfig $config
*/
public function setConfig(JobConfig $config)
{
$this->config = $config;
}
/**
* @return JobConfig
*/
public function getConfig()
{
return $this->config;
}
/**
* Output only. The time the job was created.
*
* @param string $createTime
*/
public function setCreateTime($createTime)
{
$this->createTime = $createTime;
}
/**
* @return string
*/
public function getCreateTime()
{
return $this->createTime;
}
/**
* Output only. The time the transcoding finished.
*
* @param string $endTime
*/
public function setEndTime($endTime)
{
$this->endTime = $endTime;
}
/**
* @return string
*/
public function getEndTime()
{
return $this->endTime;
}
/**
* Output only. An error object that describes the reason for the failure.
* This property is always present when ProcessingState is `FAILED`.
*
* @param Status $error
*/
public function setError(Status $error)
{
$this->error = $error;
}
/**
* @return Status
*/
public function getError()
{
return $this->error;
}
/**
* Optional. Insert silence and duplicate frames when timestamp gaps are
* detected in a given stream.
*
* @param bool $fillContentGaps
*/
public function setFillContentGaps($fillContentGaps)
{
$this->fillContentGaps = $fillContentGaps;
}
/**
* @return bool
*/
public function getFillContentGaps()
{
return $this->fillContentGaps;
}
/**
* Input only. Specify the `input_uri` to populate empty `uri` fields in each
* element of `Job.config.inputs` or `JobTemplate.config.inputs` when using
* template. URI of the media. Input files must be at least 5 seconds in
* duration and stored in Cloud Storage (for example,
* `gs://bucket/inputs/file.mp4`). See [Supported input and output
* formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-
* and-output-formats).
*
* @param string $inputUri
*/
public function setInputUri($inputUri)
{
$this->inputUri = $inputUri;
}
/**
* @return string
*/
public function getInputUri()
{
return $this->inputUri;
}
/**
* The labels associated with this job. You can use these to organize and
* group your jobs.
*
* @param string[] $labels
*/
public function setLabels($labels)
{
$this->labels = $labels;
}
/**
* @return string[]
*/
public function getLabels()
{
return $this->labels;
}
/**
* The processing mode of the job. The default is
* `PROCESSING_MODE_INTERACTIVE`.
*
* Accepted values: PROCESSING_MODE_UNSPECIFIED, PROCESSING_MODE_INTERACTIVE,
* PROCESSING_MODE_BATCH
*
* @param self::MODE_* $mode
*/
public function setMode($mode)
{
$this->mode = $mode;
}
/**
* @return self::MODE_*
*/
public function getMode()
{
return $this->mode;
}
/**
* The resource name of the job. Format:
* `projects/{project_number}/locations/{location}/jobs/{job}`
*
* @param string $name
*/
public function setName($name)
{
$this->name = $name;
}
/**
* @return string
*/
public function getName()
{
return $this->name;
}
/**
* Optional. The optimization strategy of the job. The default is
* `AUTODETECT`.
*
* Accepted values: OPTIMIZATION_STRATEGY_UNSPECIFIED, AUTODETECT, DISABLED
*
* @param self::OPTIMIZATION_* $optimization
*/
public function setOptimization($optimization)
{
$this->optimization = $optimization;
}
/**
* @return self::OPTIMIZATION_*
*/
public function getOptimization()
{
return $this->optimization;
}
/**
* Input only. Specify the `output_uri` to populate an empty
* `Job.config.output.uri` or `JobTemplate.config.output.uri` when using
* template. URI for the output file(s). For example, `gs://my-
* bucket/outputs/`. See [Supported input and output
* formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-
* and-output-formats).
*
* @param string $outputUri
*/
public function setOutputUri($outputUri)
{
$this->outputUri = $outputUri;
}
/**
* @return string
*/
public function getOutputUri()
{
return $this->outputUri;
}
/**
* Output only. The time the transcoding started.
*
* @param string $startTime
*/
public function setStartTime($startTime)
{
$this->startTime = $startTime;
}
/**
* @return string
*/
public function getStartTime()
{
return $this->startTime;
}
/**
* Output only. The current state of the job.
*
* Accepted values: PROCESSING_STATE_UNSPECIFIED, PENDING, RUNNING, SUCCEEDED,
* FAILED
*
* @param self::STATE_* $state
*/
public function setState($state)
{
$this->state = $state;
}
/**
* @return self::STATE_*
*/
public function getState()
{
return $this->state;
}
/**
* Input only. Specify the `template_id` to use for populating `Job.config`.
* The default is `preset/web-hd`, which is the only supported preset. User
* defined JobTemplate: `{job_template_id}`
*
* @param string $templateId
*/
public function setTemplateId($templateId)
{
$this->templateId = $templateId;
}
/**
* @return string
*/
public function getTemplateId()
{
return $this->templateId;
}
/**
* Job time to live value in days, which will be effective after job
* completion. Job should be deleted automatically after the given TTL. Enter
* a value between 1 and 90. The default is 30.
*
* @param int $ttlAfterCompletionDays
*/
public function setTtlAfterCompletionDays($ttlAfterCompletionDays)
{
$this->ttlAfterCompletionDays = $ttlAfterCompletionDays;
}
/**
* @return int
*/
public function getTtlAfterCompletionDays()
{
return $this->ttlAfterCompletionDays;
}
}
// Adding a class alias for backwards compatibility with the previous class name.
class_alias(Job::class, 'Google_Service_Transcoder_Job');